Why settle for unsatisfied cleaning and maintenance services
when you can prevent the problem to arise in the first place?
Whenever you embark on your search for the right HVAC system for your home, you will be met with a multitude of options to
choose from. Various factors, ranging from aesthetics to build quality will
help you reach a decision on which HVAC system is the best for your home. However, one of the most important
decision factors will be the efficiency of the system. This is where the
importance of a high SEER rating becomes prominent, as a system with a high
SEER rating, is bound to be efficient.
SEER stands for Seasonal Energy Efficiency Ratio. It is often
regarded as the best seal of approval that a system is efficient. Therefore, HVAC companies strive towards high efficiency in
order to obtain high-level SEER
The SEER rating is calculated by dividing the cooling output of
your air conditioner over the season and then dividing that number by the
energy it comes in watts per hour. This serves as an accurate measurement for
determining how well an HVAC
system will perform in your home.
A typical air conditioner will be rated at around 13 SEER or 14
SEER. Better ones will be rated at a higher 16 or 17. Finally, the best of the
bunch, however, reach upwards of 25 SEER.
These systems are quite efficient and are viable options as the heating and cooling
for your home.
Determining the optimal cooling output for an air conditioner
requires setting a standard that is consistent across the board. Usually, HVAC
systems are tested against an outdoor temperature of 82 degrees and an indoor
temperature of 80 degrees.
The relation between numbers is
just as they seem. That is the higher the
SEER efficiency rating of a system, the more efficient it is. Although the
relationship is not directly proportional, you can expect that a system rated
as 16 SEER is almost 60% more efficient than a system rated as SEER 10.
Plenty of Trane HVAC systems resides in the normal rating range, like the Trane 14 SEER systems and
16 SEER systems. Some Trane systems take it a step further with ratings
as high as 17 SEER. Similarly, you can expect about the same from normal Carrier system. Therefore, once you start
searching around in the market, you will see that your options are quite large.
You should keep in mind however, there are set minimum SEER ratings for an HVAC system that you can set up in your
system is only as strong as the maintenance effort expended on it.
Therefore, one of the main responsibilities you will inherit as the owner of a
high SEER rated machine is the fact that
it has to be kept as clean as possible.
No matter how efficient your HVAC system is, it will all be in vain if you do not put forth enough effort
to keep it clean and operational. Over time, due to the dust and grime pulled
in by the HVAC
system from the outside air, you will quickly find out that your HVAC system is not performing as efficiently as you remember it being when
you first purchased it. Moreover, its heating and cooling
have been quietly deteriorating as well.
When you are faced with these dilemmas, it is time for you to get
serious about cleaning your HVAC
system, namely, the air ducts. Hiring any kind AC
maintenance & repair will get you hooked up with the right air duct cleaning. In addition to cleaning the air ducts, consider cleaning each of
your individual air
conditioning units as well.
Although they may seem like too much of an effort at first, once
your system has been operating for a while, and the air ducts becoming clogged
from all the dust, airflow will be greatly restricted. Your home will not be
efficiently cooled and you will be losing a lot of money on extraneous energy
bills. Therefore, instead of paying unnecessary extra bills, you can just pay a
simple air duct cleaning
will quickly restore your system to its original efficiency.
HVAC systems serve as the primary place for molds and other
microorganisms to breed in and spread out. From there, mold spores end up in
the air circulating through your home, silently increasing respiratory problems
in your family. When left out of control, these problems quickly escalate in
severity. Therefore, it is of utmost importance that a central ac unit is carefully
monitored and properly maintained. The steps taken against molds are small in
number but extremely effective.
When you end up with molds in duct, you must hire certain AC
maintenance services to come and clean up the mess. Although you can handle
most of the exterior cleaning if you end up with mold around your air vents or
filters, once there are molds
in duct, you will need professional help to come to do some air duct
If the services you hire suggest that you need air duct replacement, you must try to verify whether
their claims are true or not. This will help keep you from expending
unnecessary expenses and keep the air duct cleaning cost low.
Regardless if you own a Carrier system or a Trane system, keeping it
clean is necessary if you want to preserve its original SEER rating, and keep
it performing efficiently in order to keep your energy bills fairly low. Therefore,
maintenance often, so that you do not have to end up spending a lot of money
on AC Replacement.