Mini-split heat pump HVAC systems are getting popular in colder climates. These are green and very energy-efficient compared to other heat pumps. But you can make your mini-split heat pump HVAC system even more efficient by following few tips.
In this article, I’ll talk about those tips to get more from your mini-split heat pump HVAC system.
Mini-Split Heat Pump for Cold Climate
Mini-split heat pump HVAC systems are very efficient in cold weather. As winter is arriving, you should consider investing in a mini-split heat pump to save money on heating bills.
Regular heat pumps consume a lot of energy. For example, during winter, regular heat pumps consume around 1500 to 2000 kWh. On the other hand, a mini-split heat pump HVAC system will consume around 1200 to 1300 kWh in winter. That means you’ll be able to save a lot of energy for heating and eventually it’ll save you money.
Again, under 20 degrees Fahrenheit, the mini-split heat pump runs at almost 100% efficiency. This makes the mini-split heat pump HVAC system greener compared to other heat pumps.
That’s why if you’re looking for a new heating system for this winter, consider investing in a mini-split heat pump HVAC system.
3 Tips to Get More from Mini-Split HVAC System
1. Set the Right Temperature
Setting the right temperature is important when you’re planning to save money on heating bills. Many homeowners set their mini-split thermostat temperature to a higher temperature and think that their home will become warm faster. But this should be avoided.
You’ll have to remember that the mini-split heat system or any heat pump HVAC system doesn’t work as a fan. No matter which temperature you set in your thermostat, it’ll take time to reach your desired thermostat settings.
Besides, if you set a higher temperature in your mini-split heat pump, it will create a lot of stress and strain on your heat pump. As a result, your mini-split heat pump won’t be able to perform efficiently, and your comfort will be hampered.
Again, when you set a higher temperature in your mini-split heat pump, it’ll start to consume more electricity. As a result, your heating bills will go up.
That’s why it’s recommended that you set 60 degrees Fahrenheit during the day. But during sleep, you can lower your mini-split temperature a bit. You should set the temperature to 50 degrees Fahrenheit during your sleep. Don’t worry; it won’t hamper your sleep or comfort. Instead, it’ll increase your comfort, and you’ll have a sound sleep.
When you set the mini-split heat pump’s temperature to 50 degrees Fahrenheit, air will start to circulate in your space. As a result, your space won’t have any cold spots, and heat will be spread evenly in your space.
2. Mount Your Outdoor Unit above the Ground
Mount your outdoor condenser unit at least two feet above the ground. But don’t forget to build a shade or roof on it. This will enhance the performance of your mini-split heat pump.
In regular operation, the mini-split heat pump's evaporator coil will freeze the moisture in the air. But to do this, a mini-split heat pump will require more energy. As a result, overall efficiency will be reduced.
Besides, during the defrost cycle, this ice can melt and accumulate under your outdoor condenser unit. This can be very dangerous for your mini-split heat pump and can cause damage to your heat pump.
But when you set to mount your outdoor condenser unit higher from the ground, you won’t face these problems. Your mini-split heat system will pull the air at low velocity through the floorboards.
Again, in sunny weather, your floorboards will become warm, and this will increase the efficiency of your heat pump.
3. Use Right Sized Pipes
When you’re planning to get the most out of your mini-split heat system, use right-sized pipes. With right-sized pipes, you can increase efficiency, and you’ll have less noise.
Many homeowners don’t understand the importance of the right sized pipes. As a result, they install small-sized pipes in their heat pump. But when you have a small-sized pipe, it’ll reduce the efficiency of your heat pump. Besides, as I mentioned earlier that your heat pump HVAC system will make more noise.
That’s why it’s recommended that you install at least 15 feet pipe in your mini-split heat pump. This will increase the efficiency of your heat pump.
See the summary of this content here in this infographic – 3 Tips to Increase Efficiency with Mini-Split Heat System [Infographic]
If you are looking for HVAC equipment at an affordable rate, you can check out HVAC Wholesales for best offers.
We have Trane 14 SEER HVAC Systems, Trane 16 SEER HVAC Systems, Trane 17 SEER (& Up) HVAC Systems and Heat Pumps among other HVAC components.
Also, look no further for your Air Duct Cleaning, HVAC repair and maintenance needs. Just contact us and we will be there for you.